Tuning durch Hardware (-modifikation und/oder -ergänzung).
Reduzieren der Leistungsaufnahme der CPU
VCool - Cool your Athlon/Duron during idle - Windows-
Version, vcool.occludo.net.
»The Athlon (or Duron) enters a lower power state only when
its system bus is disconnected. However the (VIA-)Northbridge will
only disconnect the bus if its "Bus Disconnect Enable" bit is set
and the CPU is in STPGNT state. VCool allows you to enable this bit
so your CPU can relax when there's nothing to do«.
»This little utility will cool your Athlon/Duron processor
on Via KT133 or KX133 (VT8363 or VT8371/ VT82C686x) chipsets during
idle«.
Plattform: Linux; Red Hat- Installer von Patrik Sandberg; Kernel-
Patches von Volker Schmidt und Laurent Latil für Linux- Kernel
2.4.8, 2.4.13, 2.2.20 und 2.4.18.
Achtung: Die Kernel- Pathces funktionieren nicht mit SMP-Kerneln!
»CpuIdle is a CPU cooling and power management software.
CPU cooling will help you achieve these things: decrease CPU
temperature, enhance stability, enable overclocking (overclocking
increases temperature- CpuIdle gives additional headroom), increase
CPU life (a decrease by 10°C doubles the life span), cut power
consumption. Unlike normal power management provided by the
operating system, CpuIdle is always active. CpuIdle is even working
even when you're actively using your computer«
Aktuelle Version: 6.0b
Unterstützte Chipsets:
VIA: VIA KM400, VIA KT400, VIA KT333, VIA KT266, KT266A, VIA
KT133, KT133A, VIA KX, KX133;
Ergänzungen, Fragen und
Kommentare:
Kontakt |
Foren |
Wiki.
E-Mail: echo "asb at keNOSPAMfk.net"| sed -e "s/ at /@/" -e
"s/NOSPAM//". Copyright |
Impressum |
Credits.