Poweroff 3.0
A free shutdown utility
Created by Jorgen Bosman
Made in Belgium
Attention: This is an
mirror of the official on-line documentation at
http://users.pandora.be/jbosman/poweroff/poweroff.htm which might
contain a more recent version.
Download of Poweroff:
http://users.pandora.be/jbosman/index.htm.
1 Introduction
Poweroff is a small program that allows you to control the power state of
your pc.
It can power off, shutdown or reboot your pc, log you off, lock your
workstation, go to standby or hibernation mode and even wake up another pc.
All actions can be done locally or on a remote pc (if they are running
poweroff).
The action can be performed immediate or scheduled, by using a built-in
scheduler.
All actions and options can be controlled by command line options. This way,
you can easily integrate poweroff in your batch files.
It should run on Windows 95/98/Me/NT4.0/2000/XP, each with its own
limitations. Beware that I haven’t tested the program on these operating
systems, bun in theory it should work on all of them…
Since this release has been completely rewritten from scratch, it may be
possible that it still contains some bugs. Please let me know if you find
one.
Full source code is included!
2 Installation
Installation is very easy, just extract the
poweroff.exe file somewhere where you can find it and double-click the
executable. You do not need any of the other files in the zip file, unless
you are interested in the source code.
To uninstall, simply delete the poweroff.exe file. Poweroff stores its
settings in the registry, so you should remove them also, either by
selecting ‘Remove settings’ from the file menu or by manually removing them
from the registry using ‘regedit.exe’
(WARNING: using regedit can damage your windows configuration, so be
careful what you do!). The key that you can safely delete is
HKEY_CURRENT_USER\SOFTWARE\Poweroff
If poweroff starts up, then it first looks for settings in
HKEY_CURRENT_USER. If it cannot find any, then it looks in
HKEY_LOCAL_MACHINE. This way you can define global settings and per user
settings. You will have to create the global settings manually.
To delete the poweroff service, choose ‘Remove service’ from the service
menu. The settings are automatically removed. To manually remove the service
settings, delete the registry key
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Poweroff\Parameters
Other registry keys that may be lying around then the service is removed
are:
HKEY_LOCAL_MACHINE
\System\ControlSet00x\Services\PowerOff
HKEY_LOCAL_MACHINE \System\ControlSet00x\Enum\Root\LEGACY_POWEROFF
These should disappear when your computer is
rebooted. They can be safely deleted when the service is removed.
You need Internet Explorer 4.0 or higher because it uses some common
controls that are shipped with IE.
3 Usage
3.1 Starting
When you double-click the poweroff executable,
the main window is shown. Here you can select which action to perform and
select the appropriate options. To execute the desired action, simply hit
the ‘Do it’ button.
Figure 1
3.2 Actions
Poweroff supports the following actions:
3.2.1 Logoff
Logs off the current logged on user.
3.2.2 Reboot
Reboots the computer.
3.2.3 Shutdown
Shutdown the computer.
In NT/2000/XP this will display the standard message ‘It is safe to shutdown
you computer’.
In Win9x/Me this will poweroff your pc if your hardware supports it
3.2.4 Poweroff
This action will physically power off your
computer. Your hardware must support this, for example an ATX motherboard
and power supply should support it, but an old AT motherboard probably
doesn’t support it. You also have to have ACPI or APM enabled in your bios.
And the power options must be correctly configured in the windows control
panel. If Windows performs a poweroff when you do a normal windows shutdown
from the start menu, then it will also work with this program.
To enable poweroff in Windows NT, you will need a hal.dll that is capable of
shutting down your workstation. You can try one that's supplied with service
pack 4 (or higher): hal.dll.softex
Just extract the service pack (with the /x option),
There are several machine-specific HAL.DLL’s, and you MUST extract the
matching HAL*.DLL.SOFTEX from the service pack. To avoid problems when
someone overwrites the good HAL.DLL with a bad one it's better to
rename HAL*.DLL.SOFTEX to %SystemRoot%\System32\HALPOWER.DLL for
instance, copy the line in %SystemDrive%\BOOT.INI which loads the current
system, alter the description and append " /HAL=HALPOWER.DLL". Now one can
choose between the two HALs and has a fallback if the new one fails.
If you like NT to automatically poweroff at
shutdown, set the following registry key to 1:
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows
NT\CurrentVersion\Winlogon\PowerdownAfterShutdown
3.2.5 Standby
If your pc supports it, then this will put your
pc into standby mode (sleep mode). If you get a strange error message, then
probably on of your device drivers doesn’t support standby. Standby is not
supported on NT.
3.2.6 Hibernate
If your pc supports it, then this will put your
pc into hibernate mode. If you get a strange error message, then probably on
of your device drivers doesn’t support hibernate. You also have to have
hibernation enabled in your power settings of the windows control panel
(windows 2000 or above). Hibernate is not supported on Windows 95 or NT.
3.2.7 Lock
This action will lock your workstation. This is
only supported on Windows 2000 or above.
3.2.8 Wake-On-LAN
This action allows you to start up a remote pc.
This remote pc must support Wake-On-LAN. This means that you have to have a
network card that is connected via an extra wire to the motherboard (or
power supply) to provide some power. In the system BIOS, Wake-On-LAN must
also be enabled.
How it works:
The network card constantly monitors the network for a ‘Magic Packet’ when
the computer is switched off. This magic packet is a series of bytes that is
sent over the network. A magic packet consists of a header (6*0xFF) and the
MAC address of the network adapter repeated several times (16 times), for
example if your MAC address is 01:02:03:04:05:06 (6 bytes), then the magic
packet looks like this:
FFFFFFFFFFFF010203040506010203040506010203040506010203040506010203040506010203040506010203040506010203040506010203040506010203040506010203040506010203040506010203040506010203040506010203040506010203040506
The nework adapter recognizes the sequence and triggers the power supply to
turn on the computer.
3.3 Where to do the action
3.3.1 Local Computer
When this radio button is selected, then the
action is performed on the local computer. This radio button is unavailable
when the action is Wake-On-LAN. This is because there’s no way that you can
turn on your own computer...
3.3.2 Remote Computer
When this radio button is selected, then the
action is performed on a remote computer. You have to click the ‘Specify’
button to specify on which remote computer to perform the action.
When the action is anything else than
Wake-On-LAN, you are presented with the following dialog box:
Figure 2
-
Computer name: This is the name (or ip
address) of the remote computer
-
Use NT protocol: When you select this, then
the standard NT protocol/authentication is used to reboot or shutdown
the remote computer. These are the only two options supported in this
mode!
Figure 3
You have to specify whether you want to use the credentials of the user
that you used to log into windows. In that case, you don’t have to
supply a username and password.
If your current account is not allowed to shutdown the remote machine,
then you can specify another username and password to connect to the
remote machine that has the rights to shutdown the machine. This
username can be a username of your current domain, then you only need to
specify the username and password. If the user is from a different
domain or the remote computer’s local domain, then you have to prefix
the username with the domain name (e.g.: DOMAIN\Username), see figure 3.
Note that if you currently have a drive mapping of printer mapping to
the remote machine, you cannot specify another username, this is an
NT restriction.
This mode is only supported from and to NT/2000 computers. No
Windows 9x/Me support!
When you do not select the 'use nt protocol' checkbox, then poweroff
must be running on the remote machine, either as a service or
interactive with the ‘Allow remote’ option enabled.
When that is the case, then all actions are possible on the remote
machine and it doesn’t matter which version of windows is running there.
Of course, you can still only perform actions that the remote OS
supports…
-
Password: Here you can specify the password
that gives you access to the remote machine, leave blank if no password
was specified by the remote poweroff program.
-
Port number: Here you can specify the port
number where the remote poweroff program is listening to
-
Save password: When you save your settings
in the main poweroff screen, then the password for the remote machine is
also saved. This will store the password as plain text in the registry!
-
Schedule on remote machine: When you don’t
use NT authentication, then you can choose to do scheduling locally or
on the remote machine. If you choose remote scheduling, then poweroff
must be running on the remote machine and you can stop your
local poweroff when the action has been submitted to the remote
machine. Otherwise, you have to leave your local poweroff program
running until the time arrives.
When the action is ‘Wake-On-LAN’, then you are
presented with the following dialog box:
Figure 4
You have to specify the remote computer’s IP address, subnet mask and
MAC address. The IP address and subnet mask are necessary to calculate the
broadcast address. The magic packet is only broadcasted to the right subnet.
The MAC address is the physical hardware address of the computer’s
network adapter. You can click the ‘Lookup’ button to fin the hardware
address. This performs a ping to the remote computer and then looks into the
arp table for the IP address. This means that the lookup may not always work
correctly. If the lookup fails, then you must get the MAC address from the
remote computer itself by inspecting the network adapter’s properties. The
MAC address is a series of 12 hexadecimal
numbers. Some adapters may display the MAC address as XX-XX-XX-XX-XX-XX, but
in poweroff it must be specified without the dashes.
3.4 When to do the action
3.4.1 Immediate
Executes the desired action immediately when
you press the ‘Do it’ button.
3.4.2 Scheduled
Executes the action at a certain moment in
time. Click the ‘Schedule’ button to specify when to execute the action.
Figure 5
In the time field, you can specify the time
when the action must be performed. The time format is hh:mm (0-23 hours).
The date radio box lets you choose the days on which the action must be
performed:
-
Fixed day: Performs the action only once on
the specified date. The date format is dd/mm/yyyy
-
Daily: Performs the action on the days of
the week that you specify. You can also select the weeks of the month on
which to perform the action. For example you may choose to reboot your
pc at each Friday of weeks 1 and 3. This option requires that you
install the poweroff service.
-
Day of month: Performs the action on a
specific day of the month each month. For example you may choose to
reboot your pc every 1st of the month. This option requires that you
install the poweroff service.
-
After x seconds: Performs the action after
the specified number of seconds.
3.4.3 After a process stops
Executes the action when some running process
finishes. Click the ‘Process’ button to specify the process.
Figure 6
Here you can type the exact process name of
choose the name from the current process list by clicking the ‘…’ button.
Figure 7
Poweroff will poll the running processes every second. When the specified
process is not running, the action will be executed. This can be useful for
shutting down your pc when a certain program has finished or even as a
watchdog to reboot the pc when a program that should be running has died.
3.5 Options
3.5.1 Warning Message
With this option you can give a warning message
to the user before performing the
action. Click the ‘Message’ button to specify the message properties:
Figure 8
You can enter the number of seconds that the
warning message must be shown. When the seconds have passed, then the action
is performed.
You can also specify the message text that must be shown.
If you want a sound to be played when the dialog box is shown, then you can
select the ‘Play a sound’ checkbox. Then you must also specify the sound
file that must be played. If the action must be performed on a remote
computer, then the sound file must also exist on the remote computer!
3.5.2 Run a program
This option allows you to run a program before
the action is executed. This can be useful to properly shutdown some other
program before shutting down your pc. Click the ‘Program’ button to enter
the program options:
Figure 9
You must enter the program that must be
executed, or choose it from a list by clicking the ‘…’ button. You can also
specify the startup directory for the program of select it from a list by
clicking the ‘…’ button.
If you need to run multiple programs, then you should put them inside a
batch file and then call the batch file from within poweroff.
3.5.3 Force applications to close
This option is useful for forcing running
applications to close. Otherwise some applications may not exit when windows
is shut down because they popup a dialog box or because they ’hang’. This
option kills all running programs before logging off, rebooting, shutdown or
poweroff.
This also implies that any changes made in running programs will not be
saved, so for example if you have a text editor open with unsaved changes,
then the editor will be closed without asking you to save the changes!
3.5.4 Visible in tray
When this option is selected, then the poweroff
icon will be visible in the system tray when the ‘Do it’ button has been
pressed and a non-immediate action has been selected. Otherwise, poweroff
will seem to have disappeared and there’s no way to make it reappear.
3.5.5 Allow cancel
When this option is selected, then you will be
able to cancel any chosen action (except when ‘Immediate’ execution is
selected). You will be able to cancel the action from the system tray and in
the warning dialog (if those options are set).
3.5.6 Allow remote control
When this option is selected, then other
computers can connect to your pc and do all actions that poweroff supports
on your pc remotely. This is useful when running poweroff as a service and
when you’re the network administrator, then you can reboot remote machines
from your pc. Click the ‘Settings’ button to specify remote control options:
Figure 10
You can specify the TCP port number where
poweroff listens to for connections.You can also specify a password that
remote computers must enter before they gain access to your pc. This
password is encrypted and stored in the registry.
3.6 Menu
3.6.1 File menu
Figure 11
-
Save Settings: This saves the current
settings to the registry. The next time you start poweroff, it will read
these settings from the registry so that you don’t have to set you
preferred settings again.
-
Load Settings: This reads the settings from
the registry and overwrites any changes made
-
Remove Settings: This removes all settings
from the registry and restores the default settings.
3.6.2 Service
Figure 12
-
Create service: This creates the poweroff
service. This makes poweroff run in the background and can even run when
you’re not logged on. The current settings are saved to the registry so
that the service can run with these settings. When the ‘visible in tray’
option is selected, then the poweroff service is accessible via
the system tray. The service will only execute some action when the
‘Scheduled’ option is selected, otherwise poweroff will just start up
and will be visible in the system tray (if that option was selected of
course).
-
Remove service: This removes the poweroff
service. If the service is currently running, it is stopped (only on
NT/2000/XP). On 95/98/Me you will have to reboot in order to stop the
service. Removing the service will also remove the service settings.
-
Save settings to service: This will save
the current settings to the service. On NT/2000/XP, the service will
also be restarted to pick up the new settings. On 95/98/Me, you will
have to reboot for the service to pick up the changes.
-
Load settings from service: This will read
the service settings from the registry and make them the current
settings.
3.7 Event Logging
If you have Windows NT/2000/XP, then you can
always check the event log (application log) for messages from poweroff.
Here you can find information and error messages about the actions that were
performed.
4 Command-line options
You can control every option and setting from
the command-line. This makes poweroff excellent for use in batch files. Some
options have changed since previous releases, so check your batch files! If
you do poweroff /?, you will get an overview of all the options (look above
for a description of all the settings):
Usage: poweroff action [options]
Actions: logoff, reboot, shutdown, poweroff, standby, hibernate, lock or wol
Options:
-warn : Show a warning message before doing the action
-warntime s : Show the warning message for s seconds
-playsound : Play a sound when the warning is displayed
-soundfile “f” : Specifies the .WAV file that must be played
-msg "m" : Specifies the warning message, use \n for a newline character
-force : Force applications to close
-wait s : Wait s seconds before checking the time
-remote m : Do the action on the remote machine m (name or ip)
-remschedule : Do the scheduling on the remote machine
-use_nt : Use the NT protocol to shutdown/reboot a remote machine
-port p : Use port p to connect to the remote machine
-username u : User NT username u to connect to the remote machine
-password p : Use password p to connect to the remote machine
-run : Run a program before doing the action
-program "p" : Runs program p before doing the action
-directory "d" : Start the program in directory d
-notray : Do not show poweroff icon in the system tray
-nocancel : Do not allow the user to cancel the action from the tray or in the warning dialog
-immediate : Perform the action immediately (default)
-scheduled : Perform the action in a scheduled manner
-time hh:mm : Perform the action at the specified time
-date dd/mm/yyyy: Perform the action on the specified date
-days [m,t,...] : Perform the action on the spcified days of the week (m,t,w,th,s,su)
-weeks [1,..,5] : Perform the action on the spcified weeks (default=all weeks)
-day d : Perform the action on the specified day of the month (1-31)
-seconds n : Perform the action after n seconds
-process p : Perform the action when a process named p does not exist anymore
-ip ip : Specifies the ip adress for WOL
-subnet s : Specifies the subnet mask for WOL
-mac m : Specifies the mac address for WOL
-allow_remote : Allow remote control
-remote_port p : Listen on port p for commands
-remote_pswd p : Set a password that clients must give for remote control
-simulate : Simulate all actions, do not perform them
-minimize : Start minimized in the system tray
-quiet : Don't display error messages
-save_settings : Saves current settings to the registry
-remove_settings: Remove the settings from the registry
-save_svc_set : Save current settings to the service
-remove_svc_set : Removes the service settings
-create_service : Creates the poweroff service, including the settings
-remove_service : Removes the poweroff service, including the settings
-debug : Start poweroff in debug mode
Examples:
The following command shuts down the pc after
giving a 10 second warning.
C:\poweroff\poweroff poweroff -warn -warntime
10 -msg "You will be logged off in 10 seconds"
The following command creates a service that shuts down the pc everyday at
23:00, forces all applications to close, gives a warning to the user, plays
a sound file when the warning dialog is shown and listens for remote control
using a password:
C:\poweroff\poweroff poweroff -warn -warntime 60 -msg "You pc will poweroff
in 60 seconds\nPlease save your work" -playsound -soundfile
"d:\winnt\media\ringin.wav" -force -scheduled -time 23:00 -days
m,t,w,th,f,s,su -allow_remote -remote_pswd password -create_service
The following command will shutdown a remote computer using the standard
NT protocol:
C:\poweroff\poweroff poweroff -remote computer -use_nt -username
computer\administrator -password password
The following command will reboot the computer after a program (cmd.exe)
has finished:
C:\poweroff\poweroff reboot –process cmd.exe
The following command will wake up a remote computer:
C:\poweroff\poweroff wol –ip 10.0.0.1 –subnet
255.255.255.0 –mac 0050BF0852A2
The following command will log off the user 60 minutes after logging on when
the command is put inside the startup folder. The user will not be able to
see that poweroff is running and will not be able to cancel it:
C:\poweroff\poweroff logoff –scheduled –seconds 3600 –notray –nocancel
–force
This command simply powers off your computer:
C:\poweroff\poweroff poweroff
5 Remote Control
You can remotely control poweroff by starting
it as a service and setting the ‘Allow remote control’ option. You can
control it by using poweroff itself and selecting a remote computer, or you
can control it by using telnet to the port where poweroff listens to
(default 3210). For example telnet computer 3210. You’ll see a welcome
message like this:
201 Welcome to Poweroff 3.0 created by Jorgen
Bosman
Poweroff uses a protocol like ftp or smtp with
commands and reply codes. You enter a command and poweroff will reply with
‘2xx message’ on success or ‘5xx message’ on error.
You can enter the following commands:
QUIT Terminates the connection
HELP Shows this help
PASSWORD p Authenticates the client with a password
ACTION a The action to perform (logoff, reboot, shutdown, poweroff, standby, hibernate, lock, wol)
WHO w Who must perform the action (local, remote)
WHEN w When must the action be performed (immediate, scheduled, after_process)
SIMULATE s Simulate the action (on, off)
COMPUTER c The remote computer name
MAC m The remote computer mac address (WOL)
IP i The remote computer ip address (WOL)
SUBNET s The remote computer subnet mask (WOL)
WARNING w Show warning before doing the action (on, off)
WARNTIME w The number of seconds to show the warning
MESSAGE m The warning message
PLAYSOUND p Play a sound when showing the warning (on, off)
SOUNDFILE s The WAV file to play
RUNPRG r Runs a program before doing the action (on, off)
PROGRAM p The program to run
DIRECTORY d The startup directory for the program
SCHEDULE s The type of schedule (fixed_day, daily, day_of_month, after_x_seconds)
TIME t The time when to do the action (hh:mm)
DATE d The date when to do the action (dd/mm/yyyy)
DAYS d The days of the week when to do the action (m, t, w, th, f, s, su)
WEEKS d The weeks of the month when to do the action (1, 2, 3, 4, 5)
DAY d The day of the month when to do the action (1-31)
WAIT w The number of seconds to wait before checking the time
SECONDS w The number of seconds to wait before doing the action
PROCESS p Wait for process p to finish
FORCE f Force applications to close (on, off)
CANCEL c Allow the user to cancel the action (on, off)
SHOW Show current settings
VERSION Show current poweroff version
DOIT Do the action
STOP Stops the current scheduled action
Example:
telnet computer 3210
201 Welcome to Poweroff 3.0.0.5 created by Jorgen Bosman
action logoff
250 OK
warning on
250 OK
message You will be logged off in 10 seconds
250 OK
warntime 10
250 OK
doit
250 OK
quit
201 Bye bye
Connection closed by foreign host.
6 System Tray
When poweroff is minimized or it has a
scheduled action, it sits in the system tray. You can right click the icon,
then a popup menu appears:
Figure 13
-
Restore: Restores the main window and
removes poweroff from the system tray. Only available when not executing
a scheduled action.
-
Logoff/Reboot/Shutdown/Poweroff/Standby/Hibernate/Lock: Quickly performs
the action requested.
-
Cancel pending action: Cancels a scheduled
action and restores the main window again. Only available when a
scheduled action is executing and the ‘Allow cancel’ option is
activated.
-
Exit: Quits poweroff
7 History
V3.0.0.17: 31-03-2003
V3.0.0.16: 31-02-2003
V3.0.0.15: 05-08-2002
V3.0.0.14: 27-07-2002
-
Fixed crash with new hibernate support
-
Added -debug command line option to easily
turn on debugging
-
When the new hibernate/standby method
fails, poweroff now tries the old method again.
V3.0.0.13: 24-07-2002
V3.0.0.12: 11-07-2002
V3.0.0.11: 27-05-2002
V3.0.0.10: 08-04-2002
V3.0.0.9: 26-02-2002
V3.0.0.8: 23-02-2002
V3.0.0.7: 16-02-2002
-
Fixed a bug when \n\n was specified inside
the warning message on the command-line
-
You can now escape \n with
\\n if you want to put "\n" inside the warning
message
-
If you just specified -remote m , then the
default port number was 0. Now it's 3210.
-
Added the possibility to generate lots of
debug information. You can turn on debugging by creating a registry
value HKEY_CURRENT_USER\Software\JoBo\Poweroff\debug of type DWORD and
by giving it a value of 1. If you use the poweroff service, you can
enable debug for the service by creating a registry value
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Poweroff\Parameters\debug of
type DWORD and by giving it a value of 1. Then restart the service.
Poweroff should now create a file called poweroff.log in its startup
directory.
V3.0.0.6: 02-02-2002
V3.0.0.5: 06-12-2001
V3.0.0.4: 16-11-2001
V3.0.0.3: 14-11-2001
V3.0.0.2: 12-11-2001
-
Settings are now default stored in
HKEY_CURRENT_USER
-
You can now create a service with ‘allow
remote control’ without getting an error. This setting will now only
work when poweroff is run as a service.
V3.0.0.1: 09-11-2001
-
Now uses different socket library so that
it can be used with Win95
-
Fixed bug: Ordering of controls was wrong.
This caused radio groups to be misaligned and caused the ‘visible in
tray’ checkbox to be incorrectly turned off in win95/98/Me
-
Added full version number in title bar
-
Fixed bug: When poweroff is run as a
service and ‘Visible in tray’ is off, then no icon is shown in the
system tray
V3.0.0.0: 06-11-2001
-
Completely rewritten engine.
-
Added Wake-On-LAN.
-
Improved remote control, including NT
authentication with another user and poweroff-to-poweroff communication
which means that all poweroff features are available on the remote
computer. With password protection.
-
You can now play a wav file when the
warning dialog is shown.
-
You can cancel the action when the warning
dialog is shown.
-
You can run a program when the action is
about to be performed.
-
You can quickly execute an action from the
system tray.
-
You can specify whether users can cancel an
action or not.
-
It has a built-in scheduler, now you can
schedule at a fixed date, daily, weekly or a day of the month.
-
It can run as a service (required for some
schedules).
-
You can save your settings, so that you
don’t have to fill them in each time you start poweroff.
-
Full command-line control.
-
You can wait for a process to finish before
executing an action.
-
New icon (again).
-
Windows XP support for new visual styles.
V2.1: 25-05-2001
-
Added Standby (95/98/Me/2000), Hibernate
(2000) and Lock (2000) actions
-
Improved event logging a little bit
-
Default time is now rounded to the next
hour
V2.0: 14-04-2001
V1.3.3: 15-03-2001
V1.3.2: 12-12-2000
V1.3.1: 28-11-2000
V1.3: 19-05-2000
V1.2: 03-03-2000
V1.1: 27-05-1999
-
Added a date field
-
Added the current date and time
-
Added the Now button to immediately do the
required action
-
Hide now adds an icon to the system tray.
Double-click the icon to bring the screen back up.
-
Added a force checkbox. If checked, all
applications terminate without warning.
-
Changed the format of the time to hh:mm:ss
-
The format of the date field is dd/mm/yyyy
-
Poweroff now also appears in the taskbar
V1.0: 08-05-1999
8 Contact
You can contact me for any questions, bugs,
enhancement requests, congratulations, donations (just trying), … at the
following coordinates:
jorgen.bosman@pandora.be
(home)
jbosma@ferranti.be (work)
Home address:
Jorgen Bosman
Ferdinand Verbieststraat 3 bus 5
2030 Antwerpen
Belgium
You can always find the latest version (and other tools) at:
http://users.pandora.be/jbosman/applications.html
The new direct download link for poweroff 3.0 is:
http://users.pandora.be/jbosman/pwroff30.zip
Poweroff 3.0 created by Jorgen Bosman
This is Freeware! (but you may always send me a
postcard if you like it)
| 
Kefk Network
:
Hardware |
About |
Wiki
